Category: Household renovations

Dollar Store Spring Planter Boxes

My house needed some pizazz! It was just looking a little too bare and dull and I wasn’t prepared to do anything with the brick work. As with everything, there’s a budget too and my budget wasn’t very big. So, how to make an impact on a small budget and spruce up the front of my house? Planter boxes! But, it wasn’t going to be practical for me to water real plants on a daily basis and I certainly didn’t want to have to change out the plants because of the seasons. I wanted some colour and I wanted to be able to change the colours whenever I felt the need. The answer: artificial flowers. Not normally my number one choice, but perfect for what I needed to do and the fact that I can buy them at the dollar store, made them an even better option and I can easily add more colours for each season.

IMG_2953.JPG

First step, buy some planter boxes. I happened to get mine from Lowes, they were about $7 a piece but they are good quality planter boxes and will last (a year later and they are still in great condition). Make sure you drill some drainage holes into your planter before you do anything else. Even though you are using artficial flowers, your planter is outside and needs to be able to get rid of water should you get rain. Also work out how you are going to attach the boxes to your window sills. I measured where I wanted my planter boxes to go then drilled holes in each of my planter boxes where the screws would go. I then used 3/4 inch long masonry screws and got my husband (I could have easily done it myself 😜) to drill holes in the brickwork (you will also need a masonry drill bit the same size as your screws). I know there are other options if you cannot drill into your house or if you don’t want to permanently attach the boxes, just ask someone at your local hardware store to show you alternative ways to showcase planter boxes.

IMG_7918 2.JPG

Screenshot 2019-04-04 11.53.32.png
Masonry screw

Obviously, you are going to need several bunches of artificial flowers and something to put them into inside your planter box. I bought the floral foam also from the dollar store and used this as my base. Try to separate your flowers and your greenery (at the original time of purchase, I bought this greemnery but it hasn’t held up well over the year, so I actually interchanged for a different kind when I added some new flowers for Spring). Cut your stems as long as you possibly can using some wire cutters, then insert into the foam pieces, ensuring you try to keep the same number of flowers in each planter and spread them out evenly. You may even want to raise the foam up a little bit if the stems aren’t long enough to show above your planter box, you can either add a second foam piece on top or just put a layer of moss or even dirt under the foam (the only thing you do need to think about is that you don’t want your planters to be too heavy if you are attaching them using the masonry screws so the dirt may not work).

After you have arranged your flowers, you want to make sure they stay in place, so this is when you will need another layer to hold them down, I used moss that I raked up from my yard so it still had some dirt attached to it and was heavier than moss that you would buy from a store along with a few small rocks.

Then it’s time to attach your planter boxes and voila! A gorgeous spruce up to some boring areas that doesn’t require very much maintenance!

Our dog loves to photobomb 🙂

*Note: Every season, I have added to my flowers with some different colours. It’s probably time to throw some of the original roses out as they have really faded (Our house faces East so gets the rising sun) but I haven’t worried about that just yet because the addition of the yellow, white and orange flowers and the other greenery, has spruced it up when you are looking at it from afar.

If you enjoy reading my crazy, varied blogs, please subscribe here on WordPress. Sharing is caring, so feel free to share with your friends. I’m on Facebook: Aussie Mum’s Adventures. Come like my page and share it with your friends! You can find me on Twitter: @ozmumsadventures, on Instagram: Ozmumsadventures, and on Pinterest: Aussiemumsadventures

Bathroom Makeover – The Flooring

So hubby and I decided it was finally time to actually do some sort of makeover of our master bathroom. It wasn’t a big space but it certainly wasn’t a nice one either. The only thing acceptable in it was the shower itself. Somebody had obviously recently renovated it. Not necessarily in my choice of colour, but it was certainly good enough for us not to worry about ripping it up and starting over. This isn’t our forever home. We did however desperately want to get rid of the god-awful brown square tiles covering the floor and the lip leading into the shower. 

I am reasonably sure the man who lived in this house prior to us, had absolutely no taste whatsoever, and I mean that in the nicest possible way. We have seen numerous examples throughout the house proving this point. Just look at the backsplash (almost identical to the bathroom tiles) and countertops in the kitchen: 

IMG_0110

I’m not sure if he was doing everything possible to eradicate everything even remotely feminine in this house (apparently they went through a pretty nasty divorce after he told her to leave because he had found “the love of his life”)! I mean he seriously sounds like such a dick anyway! Good riddance! And good riddance to the ugly brown tiles throughout the house that don’t match anything else. 

Back to the bathroom: we had decided on the LifeProof vinyl flooring planks, having been very impressed by the way they’ve held up over the past year in our basement. We love the colour too (seasoned wood) and it looks amazing with blue paint (& every other colour too)! Here’s a link to it at the Home Depot: LifeProof Seasoned Wood multi-width vinyl flooring (and no, I’m not getting paid by them to share this link with you, though I wish I was! lol)

IMG_8445

We knew how durable the vinyl flooring was because we used it in our basement renovation over a year ago and it has withstood three kids, a dog, a cat, numerous guests (the guest room and spare bathroom are down there) even some drunk people – yes, the bar and pool table are also down there! 😉 I was actually originally toying with the possibility of using the travertine, like I had done in the kids’ bathroom, but decided against it because of what a pain in the arse it became when I actually renovated the bathroom from hell (aka the kids’ bathroom). I didn’t want to rip out the existing tile, I wanted something easy to lay, was reasonably priced and was also durable – unlike the flooring we had put throughout the main level that looked beautiful at first, but damaged the minute you breathed near it (Here is a link showing some of the ‘wear and tear’ on this flooring. Do NOT buy this product, you will regret it and the company – Harmonics, holds no liability, blaming the installation process for everything! This was the Harmonics Spiced Applewood Laminate Flooring from Costco.)

Normally, you don’t need to lay any underlay underneath a vinyl flooring but because of the square tiles, I decided to use a vapour barrier one I had found on Amazon to help even out the uneven divides between each 2×2 inch tile. It obviously need to be something that could go in a bathroom, so this one was perfect: 3in1 Silent Vapor Barrier Flooring Underlayment w/overlap and tape 100sq.ft by Feather Step and you can’t beat the price at $18 for 100 sq. ft! Be prepared though, it does smell a bit when you open the packaging up.

Screenshot 2019-03-08 14.31.06

The next thing you need to do is to work out how your flooring is going to lay. Because the Seasoned Wood Vinyl Flooring planks come in multi-widths, we had to plan this out in advance to get minimum waste. I suggest you do the same thing. Here is a time lapse video link to us laying the floor : Bathroom floor laying. So, the first thing I need to clarify is that we do have the vapor barrier upside down in this video. We did eventually reverse it, but it was a long process and quite frustrating, so I didn’t get video footage of that. Remember, silver side down.

The next problem we had was the super weird, ugly shower lip. Why would you put those ugly floor tiles going up the edge of the newly renovated shower? A normal person would have gotten rid of that, but not our guy! Probably because it was a tad too hard; it certainly puzzled us for a while as to how we were going to get rid of them without removing the tiles (we would have to do it all if we removed these ones).

IMG_8456

Hubby suggested using baseboard, but I was very concerned about the moisture getting into it, even after I coated it with spar urethane (a special urethane that is used for sealing wood in areas where it will be exposed to water or strong sunlight). We tried it nonetheless and it looked like crap to be honest. I bought a couple of different types of tiles, but we needed something big enough and with nice enough edges, that it would look good on the top where it met the other tiles from the shower, or we needed something to finish it off. It was really a matter of trial and error. We had decided to use the Aspect Peel and Stick backsplash  stainless long grain metal tiles behind the countertop (hubby’s suggestion) so I thought it might be a good idea to use these down the bottom of the shower, where it met the floor. But how to finish the edge off and cover the little bit of exposed ugly tile? I searched through the house looking for something I could use when I found it!!!

IMG_8517

Yes, that is leftover wire cord from an IKEA light! If you look closely you can see that the outside is actually covered in plastic, it was surprisingly flexible too. I straightened the cord out, sealed the ends by melting the plastic for a split second and glued it on with a waterproof glue and Voila!

ttv9o-1-e1552076689844.jpeg
The Aspect Peel and Stick tiles with the IKEA lighting cord used as the finishing touch
The finished floor!

 

We love our new bathroom floor!

If you enjoy reading my crazy, varied blogs, please subscribe here on WordPress. Sharing is caring, so feel free to share with your friends. I’m on Facebook: Aussie Mum’s Adventures. Come like my page and share it with your friends! You can find me on Twitter: @ozmumsadventures, on Instagram: Ozmumsadventures, on Pinterest: Aussiemumsadventures And please subscribe to my YouTube channel: Aussie Mum’s Adventures (I’m still working on it, so please have patience with me!).

Shut the French Door!

When it comes to French doors and privacy, there are only so many options. I started researching some of them when we installed our French doors on our house here in Virginia. We have a larger lot (over 2 acres) and are surrounded by woods, but in the winter, the trees take their deciduous steps and distant neighbours have now got much better views into your domain. This bothers me, particularly at night when it is so dark outside and the house is lit up like a small supernova. I definitely like my privacy. What to do on a budget? Well, given I had no clue how to make French Door curtains, I purchased some and they’re fabulous and cost about $30.

We have another set of French doors in our basement and it has always bothered me that my kids could be down there playing (the video gaming is set up down there) and anyone can see into those doors too. I had originally planned to buy another set of the same style of curtains for down there, but then I remembered I actually have a ton of curtains from our various moves – yes, when you move like we do, you acquire so many things – some of which are a metallic Grey and would match the decor down there absolutely perfectly! The curtains I had purchased (pictured) looked very easy to copy the style of, so with a few modifications, I set out to repurpose my existing curtains into practical ones for the French door.

54BEF12F-689F-4B0E-A7ED-523B88BE2C61.JPG

The first thing I did was measure the window opening in the door to ensure the curtains I had were long enough, they were. Then it was a matter of taking approximate measurements of the existing French door curtains to match up my gray ones. I measured the width of the curtain and realized I had to cut quite a lot off it. This is a little scary mind you as you are ruining, I mean restyling, something perfectly good. I found the best thing to do was to measure all the way down putting a small sharpie mark along the length then getting a ruler and joining these marks together, then it was just a matter of biting the bullet and cutting (if I ruined them, well I did have another back up pair that weren’t so perfect but would do). I made my curtains 26″ (66cm) wide with a half inch hem on the side that needed a new hem. Therefore, my marks were made at 26 1/2 inches (67.3 cm) across ensuring the 4 circles (normally what would go on a rod) became the feature top of my French door curtains and were evenly spaced on both sides.

With the length I cut off, I measured the amount I would need to make the two pieces that velcroed together, holding the entire curtain up when you wanted to allow daylight in. I did screw up a little bit here as I didn’t take into account the fact that the second piece wouldn’t have any hem on either end, don’t do what I did, make that second piece a fraction longer, it will make life easier and save a burnt finger when it comes to ironing that hem on. I made each of these pieces 19 1/4 ” (49cm) by 2 1/2 ” (6.35cm) PLUS hem – important you don’t forget to factor this in.

4287BBFD-43A9-4490-90D1-A1F83AE59728.JPG

I didn’t even tell you that I wanted to do this entire project without sewing! I had lots of iron-on hemming tape and thought it would be perfect for this job.

If you have never used hemming/bonding tape, basically you use an iron to melt it together, ergo bond the fabric together at your given hemline. The iron has to be hot (so the fabric you use has to be capable of withstanding a reasonably hot iron, and you must turn the steam function off. Be careful not to touch the hemming tape with the hot iron, it will melt immediately and leave a sticky residue on your iron – if this happens, turn iron off and wait to get cold before wiping with a clean cloth that has some rubbing alcohol on it (I do not know this from experience ;)). I decided to double hem my edges because I wanted a clean ‘finished’ look, it did mean a lot more work but it looks better in my opinion. One other thing I did was to cut the hemming tape in half lengthwise as it fitted each of my little, narrow hems much better like that.


Once everything was hemmed and ironed, I folded the front of the curtain over so it gave my front a more professional finish, I used more hemming tape at the top to secure these two folds together.

img_8009
I then joined the two pieces on to the back of the French door curtain like so (I pinned everything in place after I had measured it and before I permanently attached it so I could be sure it was all going to work and look nice and neat). My strips were attached 6″ in from the edges on each side.
4BF09175-9E4A-446D-B3F4-6BF70CC87877
Then it was a matter of attaching the Velcro. Again, I didn’t particularly want to sew, not that I can’t, I’m just not very good at it and don’t particularly enjoy it, so I had some sticky back Velcro from another project and just used it. This really is a matter of eyeballing and making sure they will align when joined together. Pinning helps with this too.
img_8010
Finally, it was time to attach a curtain to the French door:


I love how these turned out. They match the decor down here perfectly, I had everything on hand so didn’t actually have to purchase anything and now I know we will have privacy downstairs too!


Would you try this at your house? What do you think of this project? Please come on over to Aussie Mum’s Adventures on FB and like my page: Aussiemumsadventures. You can find me on Twitter: @ozmumsadventures, on Instagram: Ozmumsadventures, on Pinterest: Aussiemumsadventures And please subscribe to my YouTube channel: Aussie Mum’s Adventures (I’m still working on it, so please have patience with me!).